Steering Problem, Help!
[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]
Posted by CSCameron [174.26.88.71] on Tuesday, November 11, 2014 at 19:37:48 :

I installed my steering box and it's not lining up correctly. As you can see in the pic (and slideshow), it appears the steering box is mounted correctly, no foreign objects, flush with the frame.
Also, you can see that the output shaft comes through the frame "square". The steering shaft is offset slightly where it passes through the firewall, but much more at the dash?
The throttle rod is exactly centered in its hole and the cab appears to be centered on the frame? The firewall hump is centered over the bell housing nicely.
It all fit the way it was supposed to before I took it apart. Any suggestions? I'm stumped.
Thanks in advance!
Clark
Follow Ups:
- Re: Steering Problem, Help! - Keith in Washington 15:01:18 11/12/2014
- Do you have your doors on yet? - John in Utah 11:12:37 11/12/2014
- Re: Steering Problem, Help! - clueless 09:12:56 11/12/2014
- Re: Steering Problem, Help! - Dean 09:03:24 11/12/2014
- Re: Steering Problem, Help! - Daryl in Oz 01:44:23 11/12/2014
- Re: Steering Problem, Help! HAY you - The Dodge Boys 22:13:30 11/11/2014
- Cab was twisted when floors welded, now cab stays twisted? - Chris Case 21:56:34 11/11/2014
- Re: Steering Problem, Help! - Milo in Pa 21:47:35 11/11/2014
- Re: Steering Problem, Help! - Vaughn 21:05:39 11/11/2014
- Re: Steering Problem, Help! - Glen of Idaho 20:54:23 11/11/2014
- Re: Steering Problem, Help! - Paul(In NY) 20:45:48 11/11/2014
- Re: Steering Problem, Help! - jgreen 20:44:27 11/11/2014
- have you checked the frame....... - bruce in ottawa 20:30:11 11/11/2014
- Re: Steering Problem, Help! - The Dodge Boys 19:53:11 11/11/2014
- Re: Steering Problem, Help! - Kaegi 19:46:50 11/11/2014
Post a Followup
This board is powered by the Mr. Fong Device from Cyberarmy.com