Posted by Daryl in Oz [58.178.111.26] on Wednesday, November 12, 2014 at 16:10:30 :
In Reply to: 4 1/2" to both horn wire hole and column centers. posted by Chris Case [108.225.237.218] on Wednesday, November 12, 2014 at 14:48:04 :
I have both chassis, so can check the shape of the rails at the mounting, think from memory the bigger truck rails taper evenly towards the front, where the PW rails are parallel at that point. Problem is though, he says the steering was right before and he's using the same parts again? I wonder if the column was just bent/sprung into place and he didn't notice when he pulled it apart?