Posted by CSCameron [174.26.88.71] on Tuesday, November 11, 2014 at 22:05:24 :
In Reply to: Re: Steering Problem, Help! posted by Milo in Pa [71.116.18.87] on Tuesday, November 11, 2014 at 21:47:35 :
Yep, I did that but there isn't enough adjustment. It does move the shaft off of the dash by about a 1/16th of an inch but shy of center by about 3/4 of an inch.
In fact, if I remove all the bolts, I can get it to center but it moves the cab holes out of wack with the mounts, both front and rear. Since I didn't touch the mounts or the rear cab holes, the rears shouldn't be a problem as they are in the factory position.
However, if I leave the rear bolts in, no nuts, just loose, I can't get enough adjustment in the front to make any difference even with the front bolts out. The bolts in the rear limit the amount of adjustment. Really strange.
Thanks for playing! lol