Posted by Jerry in Idaho [64.139.238.43] on Thursday, March 10, 2011 at 22:47:58 :
I removed all 4 bolts that hold the cab down, and what was left of the blocks.
1. Does anyone know the purpose of using the two thin 1 1/4" nuts with the little knurled shoulder on the driver's side front?
2. I read conflicting ideas on what goes where. I know that only the front 2 sides get the oak blocks. Is there supposed to be a 3/8" rubber pad at all 4 locations? Or just at the rear?
Thanks. JH
Follow Ups: