Looks like enough parts to me.

Posted by Chris Case [75.36.47.26] on Wednesday, December 26, 2012 at 21:37:21 :

In Reply to: PCV valve: Missing somethng? posted by wayneh [68.55.55.71] on Wednesday, December 26, 2012 at 20:45:51 :

Vacuum pulls the pli\unger closed against the spring's presure. At that point there is a small air leak through the orifice that has the wire through it. The wire keeps carbon from clogging the orifice- the wire rattles around.

At full throttle / no vacuum, the spring pushes the plunger back, the tapered end comes away from it seat, to full open. That allows maximum re-cycling of the blow-by gasses. Result is cleaner crankcase,since blawby = sludge; cleaner air; and a very slight improvemnt in gas milage.

• http://imageevent.com/bigchriscase/hubprotectors

Follow Ups:

• Re: Looks like enough parts to me. - wayneh 22:20:07 12/26/2012
  • Spring too fat? - Chris Case 10:17:12 12/27/2012
    • Re: Spring too fat? - wayneh 10:53:32 12/27/2012
      • It's SUPPOSED to leak both ways. - Chris Case 15:18:37 12/27/2012
        • Re: It's SUPPOSED to leak both ways. - wayneh 20:50:46 12/27/2012
          • Re: It's SUPPOSED to leak both ways. - Brent 00:12:43 12/28/2012
            • Re: It's SUPPOSED to leak both ways. - wayneh 07:53:13 12/28/2012
              • Re: It's SUPPOSED to leak both ways. - Brent 14:58:11 12/28/2012

Post a Followup