Posted by Red [162.159.106.11] on Wednesday, January 07, 2026 at 19:12:07 :
In Reply to: Carb rebuild posted by Jamesinmt [172.68.35.143] on Wednesday, January 07, 2026 at 18:00:03 :
Make your own gasket
Sheets of gasket material are available at the Parts store
If they do not have any use paper bags of similar thickness, like shopping bags or department stores or Hardware stores use
Rub light oil on the mating surface n press it down to the paper, cutting to out with exact knife or similar
If it is a heavy object use a small ball peen hammer taping on the paper at a angle to cut it out
Easy ways around problems with old school skills.