Posted by Dan66 [172.70.211.32] on Monday, January 31, 2022 at 12:26:17 :
In Reply to: Re: Transfer Case question #1 posted by Keith in Washington [108.162.245.53] on Sunday, January 30, 2022 at 20:44:14 :
Thanks Keith. Brake and clutch do not rub floor. But, the cab seems to sit right on the frame at the driver's side rear mount area, and is about 1/8" above on the passenger's side front. So, sounds like new mounts are in order.
Searching a bit it seems there is some adjustability in the position of the cab and so I need to be careful with the steering column alignment. Is there a preferred way to support the cab to swap out the mounts, short of an overhead lift?
Thanks!
Follow Ups: