Posted by powerwagonjohn [172.70.126.249] on Wednesday, October 06, 2021 at 18:06:23 :
In Reply to: B1PW master cylinder question posted by Dickie in Southwest Va. [66.171.94.228] on Tuesday, October 05, 2021 at 07:40:02 :
A lot of good suggestions here but either way the cylinder may have to be removed so I would suggest running a good quality tap in the hole to clean up the threads then a brass pipe plug with some sealer on it. Not really for sealing but to lubricated the treads and be sure. It has always worked for me.
Thanks John
Follow Ups: