Re: Winch question

Posted by Tim Ellis [184.164.119.164] on Tuesday, March 24, 2020 at 08:40:08 :

In Reply to: Winch question posted by Steve in FH [63.224.47.224] on Monday, March 23, 2020 at 18:49:22 :

The leg should have a grease channel all the way around the interior. As long as the hole in the bushing is centered over the channel in any degree of rotation it will work. There is a good write up on assembly at PWA site with pictures of this step. https://powerwagonadvertiser.com/forums/forum/military-civilian-dodge-truck-related-forums/service-repair-procedures-%C2%97-includes-body-frame-repair-painting/10893-winch-repair-rebuild

Follow Ups:

• Re: Winch question - Jerry In Idaho 12:55:09 03/24/2020
• Re: Winch question - Steve in FH 10:49:55 03/24/2020
• That was my recollection, nt - Greg Coffin 09:58:47 03/24/2020
  • Steve could use a bent wire to feel for it - chriscase 10:36:17 03/24/2020
    • Pump some grease and see if it come out the hole, nt - Greg Coffin 11:04:44 03/24/2020
      • Re: Pump some grease and see if it come out the hole, nt - Steve in FH 11:16:41 03/24/2020
        • Re: Pump some grease and see if it come out the hole, nt - Greg Coffin 11:50:20 03/24/2020
          • Re: Pump some grease and see if it come out the hole, nt - Steve in FH 12:00:59 03/24/2020
            • Re: Pump some grease and see if it come out the hole, nt - Jerry In Idaho 12:42:52 03/24/2020
              • Re: Pump some grease and see if it come out the hole, nt - Steve in FH 19:18:48 03/24/2020
                • Re: Pump some grease and see if it come out the hole, nt - Jerry in Idaho 19:52:45 03/24/2020
              • Re: Pump some grease and see if it come out the hole, nt - Greg Coffin 13:14:00 03/24/2020

Post a Followup