Posted by Ray [162.158.69.49] on Saturday, November 26, 2016 at 17:17:28 :
In Reply to: Re: EZ-Fill Brake Resrvoir Kit posted by clueless [108.162.210.234] on Saturday, November 26, 2016 at 17:06:56 :
Don't have any.
Rather than using a small ID tubing I used a 1/2" clear tube, and on top added the same male barbed fitting with a notch cut cross the threads with a hack saw for a vent and used a cap to close. Use a male thread barb fitting and cap so any dirt/water will be kept out and is clean when you open it up to add fluid.
Follow Ups: