Re: SAE adapter pic for Don in MO

Posted by Dan in CO [172.68.35.8] on Wednesday, October 26, 2016 at 10:35:17 :

In Reply to: Re: SAE adapter pic for Don in MO posted by Don in Missouri [172.68.58.144] on Tuesday, October 25, 2016 at 23:30:49 :

I measured and it is a SAE #3, it had a stock looking dodge 147 tooth flywheel with a drive plate bolted to the stock pressure plate bolt holes.

Re: SAE adapter pic for Don in MO - Don in Missouri 12:30:13 10/26/2016

Re: SAE adapter pic for Don in MO - Dan in CO 10:37:57 10/26/2016

so i have a 540 od bolted to the - clueless 12:19:10 10/26/2016
- oops 24 holes and a tape measure - clueless 14:20:28 10/26/2016
  - storage area too dark to get a pic ----- nxt - clueless 14:26:16 10/26/2016
    - 24 holes = 2 sets of 12 - Don in Missouri 17:37:15 10/26/2016
      - the 24 holes are the bell holes not pressure plate holes - clueless 20:21:12 10/26/2016

This board is powered by the Mr. Fong Device from Cyberarmy.com