Re: brake update -i should have ordered the stock

Posted by clueless [108.162.212.64] on Tuesday, September 06, 2016 at 20:30:31 :

In Reply to: Re: brake update -i should have ordered the stock posted by Daryl in Oz [108.162.249.72] on Tuesday, September 06, 2016 at 19:21:41 :

may go the sleeve route--i m comfusing myself with all the check valves proportiong valves etc.--

even tho i got my mod fitting all done apparently the dual mc i have has a proportioning valve on it for the rear

it is for dual disc brakes on the 96 ford superduty f450 according to rockauto

so as i understand it i would need a inline check valves in each circuit for drum brakes and would want to run dual hydravacs to accomodate the 1 5/16 bore

thought i was gonna have a window to work on the truck some but i am going to have to postpone it for now

• this is the mc i have

Follow Ups:

• Re: brake update -i should have ordered the stock - Daryl in Oz 07:31:53 09/07/2016
  • Re: brake update -i should have ordered the stock - clueless 10:41:28 09/07/2016
    • how can i tell if the brass fitting is a prop. valve - clueless 11:03:46 09/07/2016
      • Re: how can i tell if the brass fitting is a prop. valve - clueless 12:13:50 09/07/2016
    • if i sleeve the stock mc - clueless 10:49:12 09/07/2016
      • Re: if i sleeve the stock mc - Daryl in Oz 18:18:17 09/07/2016
• Re: brake update -i should have ordered the stock - clueless 20:34:06 09/06/2016

Post a Followup