Posted by Greg Coffin [172.68.35.20] on Wednesday, June 15, 2016 at 19:14:57 :
In Reply to: Seal Replacement in Transfer Case posted by Miles Wagner [108.162.215.107] on Wednesday, June 15, 2016 at 18:52:33 :
Yes, you can change the seal in-place. Drop the drive shaft and remove the yoke, then pull the seal with a slide hammer, or weld on studs and use a T-style gear/bearing puller. Or you can remove the whole bearing carrier assembly and work on it on a bench. Good Luck!