Posted by Paul (in NY) [108.162.219.208] on Wednesday, January 27, 2016 at 11:52:32 :
In Reply to: I did it this way as well, but.. posted by Dan (NH) [108.162.219.248] on Wednesday, January 27, 2016 at 08:46:43 :
I have different size sheet metal screw tips that screw on the end of my slide hammer. For minion seals, I use a #14 sheet metal tip.
Drill 2 holes opposite each other in the seal edge, screw in the #14 screw tip and a couple slams on the slide hammer and that side is on its way out. Move to the opposite screw and a slam or 2 and the seal is out. Never had it fail me. To small a screw tip and it will rip right out on the first slam.
Paul
Follow Ups: