I did it this way as well, but..

Posted by Dan (NH) [108.162.219.248] on Wednesday, January 27, 2016 at 08:46:43 :

In Reply to: Re: Stubborn pinion seals? posted by Desoto61 [108.162.216.43] on Wednesday, January 27, 2016 at 08:12:03 :

Instead of welding, I drilled and tapped 1/4 inch holes. Took time setting it up, but it worked great.

This way was mentioned somewhere else in the forum, that's is how I knew it should work.

They are in there snug for sure!

Follow Ups:

• Re: I did it this way as well, but.. - Greg Coffin 20:44:22 01/29/2016
• Re: I did it this way as well, but.. - Paul (in NY) 11:52:32 01/27/2016
  • Re: I did it this way as well, but.. - Randy On Long Island. 15:13:18 01/27/2016
    • Re: I did it this way as well, but.. - clueless 18:54:43 01/27/2016
      • Re: I did it this way as well, but.. - Randy On Long Island 23:20:10 01/27/2016

Post a Followup