Posted by Jerry in Idaho [108.162.221.14] on Wednesday, January 06, 2016 at 18:06:57 :
In Reply to: Re: Jerry....... posted by Randy On Long Island [108.162.219.217] on Wednesday, January 06, 2016 at 17:03:11 :
The bracket was pretty easy. I just used a piece of angle the length of the alternator, welded a tab on each end, drilled holes to bolt it to the block and for a bolt to mount the alternator to. If I remember correctly there are a couple of holes available in the side of the block to use. It's been about 3 years since I did it and the rememberer doesn't work as good as the forgeter. :)
Follow Ups: