Posted by Willy-N [108.162.216.23] on Wednesday, January 06, 2016 at 03:35:31 :
In Reply to: Re: I would go with Franz posted by Franz [108.162.216.19] on Wednesday, January 06, 2016 at 03:19:47 :
It is 2 1/2" by 5" in size with 1/2" NPT fittings and 1/2" hose. Same as the compressor inlet but way easier to draw air thru than the factory one. I tested it with my lungs which are not that good pulling air in. The factory one is 1/2" thick and 1 1/2" dia with a felt pad and sponge stuck in the space tight and a crack around the edge to let air in. The pad really does not filter good as it is restricted down. Only pulling air thru the 1/2" hole under a pad tight against the hole. So all the air only goes thru a tiny part of the filter element. It should have had a space so air could go thru all of the pad not just a spot on it??
Follow Ups: