Posted by Milo in Pa [173.245.54.254] on Thursday, December 31, 2015 at 09:54:06 :
In Reply to: Looking for input on front axle rebuild posted by wayneh [173.245.54.42] on Wednesday, December 30, 2015 at 20:49:40 :
Hi Wayne I used a double lip seal in the front axle and used the number I found in the archives it worked good. Now I will probably have to take it back apart and take the front member out to see if the roll pins are staked or not.I just had the rear member out and when some alien put the 489s in dident stake the holes for the pins one fell out
Follow Ups: