Posted by rick [162.158.255.13] on Wednesday, December 30, 2015 at 21:49:54 :
In Reply to: Looking for input on front axle rebuild posted by wayneh [173.245.54.42] on Wednesday, December 30, 2015 at 20:49:40 :
I have the puller to remove the bearings from the axle housing if you want to borrow it. I used a roller bearing instead of the bronze bearing on the top side and it seems to work well. My tracta joints were in seemingly good shape so I just reused them, not much wear on either the bearing surfaces or joint surfaces.
Follow Ups: