Posted by Brent [206.174.171.51] on Sunday, December 06, 2015 at 23:46:24 :
In Reply to: Hydro Vac layout is Good to Go! posted by Willy-N [72.168.160.211] on Sunday, December 06, 2015 at 23:12:18 :
It will depend on what the new one calls for spec wise. It has to clear the relief port when you push on it. No big deal as long as you design it so you have some adjustment on your push rod. Not enough and the brakes could not operate correctly same applies for too much. Easy to adjust if you have a helper when adjusting it. You watch the master cylinder ports as some one pushes on the brake pedal, you should see a small amount of fluid movement in the relief port openings. Main thing is to have the linkage adjustable.
Follow Ups: