Posted by Willy-N [72.168.160.211] on Sunday, December 06, 2015 at 23:12:18 :
Just now measured the original Rod location.
It drops 6 1/2" from the top of the frame and the way I wanted to mount the Hydrovac on the frame the lever will be dead center. It also is 2 1/4" over from the edge of the frame so it lines up that way to! All things are a go to put in in there and the rod will be level and strait. The lever only moves roughly 3/4" to push the rod in by hand. I think I have that much movement of the original rod? That is the only part I have not measured yet is how far the original rod moves when you push the brake pedal. But it must be around 3/4" cause it is just pushing the master cylinder piston. The 3/4" measurement is not cast in stone I just guessed it by watching the movement.
Follow Ups: