Posted by Willy-N [72.171.192.120] on Sunday, July 05, 2015 at 22:12:54 :
In Reply to: Painless Wiring on WDX posted by Jim in Litchfield Park [24.251.253.225] on Sunday, July 05, 2015 at 18:35:56 :
I use multi-conductor cables to do my wiring with. Trailer Wire comes in 2, 3, 4, 5 and 7 cond with a covering over them. I ran a 7-cond to the rear for all the lights and trailer jack. Ran a 2-cond to the fuel tank gage and same to the fuel pump. Front Fenders got a 4-Cond to do hi/lo head lights and turn signals. I ran it to each head light housing and spliced the turn signal cable from there. All these cables go to the cab to hook up to the proper wires from fuse panel and switches. I will make it so they can un/hook easy at one spot to remove the cab some day if needed. In the picture you can see all the wires needed to do the back end running along the frame.
Follow Ups: