Posted by Willy-N [72.171.192.118] on Saturday, March 07, 2015 at 01:50:48 :
In Reply to: Picture of #6 Piston & Rings posted by Willy-N [72.171.192.122] on Friday, March 06, 2015 at 22:13:01 :
This answers my top ring slop and extra spacer ring to take up the space. The T137 piston had a single tight fitting compression top ring on my other block.
Quote:
Ring End Gap: In tapered bores, fit rings in tightest portion of ring travel
Compression: .007(mine 0.12")
Oil: .007
Clearance in Groove: Compression: .0025-004; Oil: .001-.0025(mine .012)
Wristpin Diameter, Inch: .8591-.8593