Posted by Willy-N [72.171.192.121] on Saturday, March 07, 2015 at 01:19:09 :
In Reply to: Picture of #6 Piston & Rings posted by Willy-N [72.171.192.122] on Friday, March 06, 2015 at 22:13:01 :
I have a block I forgot about that is a stock non bored T137 1953 230 cid. I just measured the piston @ 3.220" and bottom bore at 3.230". My 6X6 is 3.2743" bottom bore and 3.257" piston dia. That makes my piston 0.037" Larger or .040 pistons. My bore is I guess my bore is right, as good as I can measure it. I need 6- .040 over pistons with rings and hone the walls. My bore is .0443" or .0043 wear on the .040 bore. Well within specs I think. I just did the measurements & numbers and did not know it would come out this way?
Follow Ups: