Posted by gmharris [71.105.36.254] on Monday, May 05, 2014 at 17:06:08 :
In Reply to: Im beginning to think Im in over my head posted by Nick [99.100.212.49] on Saturday, May 03, 2014 at 22:04:12 :
Coat the cork float and the rod with gas tank sealer.
I found that it's easier to dip the float in the can than to try and brush the sealer on.
Put a light coating of grease on the bottom of the float after the coating is cured to make sure the float doesn't stick to the bottom of the tank.