Posted by Howard [74.4.35.54] on Sunday, February 09, 2014 at 06:49:54 :
In Reply to: Steel Fabricated Diesel Tank for conversion posted by Alex J [108.39.64.15] on Saturday, February 08, 2014 at 19:10:18 :
Personally I would use mild steel but the coat the interior with a commercial fuel tank lining material, while painting the outside.
I have built some aluminum marine tanks and the cost of the material is very high...
But I like your plan to GTAW, I am only set up for GMAW and just wired in a 50 amp socket for the Lincoln AC225 so I can SMAW again!