Posted by Dave [76.92.86.70] on Saturday, February 08, 2014 at 21:21:28 :
In Reply to: Transfer Case Mounted posted by Rick [67.188.186.65] on Saturday, February 08, 2014 at 19:32:39 :
Rick, there has to be some 'slop' as you call it. if there is no clearance it will make bad things happen. as everything warms and expands things could get very tight and keep the lube squeezed out of the teeth as they turn, i.e. dry gears, lots of heat. you get it, quarter turn? yea to much, couple of degrees? very good. Dave