Posted by Paul (in NY) [12.64.128.27] on Monday, January 13, 2014 at 19:46:15 :
In Reply to: Thanks! posted by Mike Hernke (MO) [99.195.249.90] on Monday, January 13, 2014 at 19:19:05 :
Even though I used the rear OEM T Case Cross Member, I had to adjust its height to match the drive line angle. I dont remember exact numbers ! But from memory, my rear differential was sitting at 7 degrees up. That means that my married drive line, ie Engine, Tranny & Tcase must sit at 7 degrees down. I Fabed my tranny cross member and adjusted he oem t case cross member to keep at the 7 degrees down.
You can see in the picture, there is inches of room between the t case cross member and drive shaft.
Paul
Follow Ups: