Posted by Daryl in Oz [210.50.11.126] on Thursday, November 28, 2013 at 16:39:09 :
In Reply to: Just hone it..... posted by Bruce in BC [24.207.18.223] on Thursday, November 28, 2013 at 11:56:35 :
What Bruce said is right, .004" on the diameter should not be a concern. Do like Bruce says, don't be in a hurry, don't take too much at the top, just looking for a smooth transition for the rings, then give it a good cross-hatch hone when the pistons are out.