Posted by clueless [201.202.29.210] on Friday, October 11, 2013 at 10:09:31 :
In Reply to: Re: what is the best clear coat posted by Marty [24.86.3.25] on Friday, October 11, 2013 at 03:58:50 :
just what the doc ordered then to give it the antique golden(plume of rust)fleece wet tshirt look
my epoxy is about $80 a gal. but it is glossy--wunder if there is something i could add to it to satin it down or flatten it down
epoxy tends to yellow overtime and i use a clear polyester sun cure over it on my boards for uv protection--boards are white due to the foam being white so with the clear resin on top you see the foam and after awhile they tend to yellow--but not sure as you would see the yellowing much with the fertan plume of rust look
looked at the data sheet on endura-appears to be epoxy with good uv protection
Follow Ups: