Posted by Mike Stone in Idaho [71.39.211.42] on Monday, March 04, 2013 at 17:04:24 :
In Reply to: Issues with Ignition./ Breaking in the motor posted by Justin in NJ [71.59.91.52] on Monday, March 04, 2013 at 16:23:28 :
do you have voltage @ the points ?
is the little spring loaded carbon connector
in the inside (center) of the distributor there? (they sometimes fall out while dinking
about with the cap)
take a volt meter to check voltage at points
sometimes the wire going into the dist is worn and shorts out