|
|
Posted by Chris Case [75.36.44.133] on Tuesday, November 13, 2012 at 17:50:39 :
In Reply to: Dropped my oil pan today... posted by CSCameron [68.228.198.56] on Monday, November 12, 2012 at 20:58:53 :
Trucks that were parked for long times had condensation that might have rusted holes in the bottom of the pan. Both of mine were that way. One didn't show until I drove it, 10 miles from home. The other, I swapped a severely dented pan off, cleaned up a spare pan full of gunk, and installed. Leaks from 4 pin holes, in the driveway, AFTER install.
Best fix is to solder or braze from inside. Last hole got brazed from out side, while in chassis.
Follow Ups: