Posted by Rob Steller on Sunday, April 01, 2001 at 0:37AM :
In Reply to: Re: Which transfer case did the WDX have? posted by Greg Coffin on Saturday, March 31, 2001 at 5:21PM :
I just pulled the transfer from my B4 apart, discovered it was from a WC-62/63, and although the casting may be the same (it has C38534 cast on it, but no ratio) as for the PW's the case bore for the rear output (non-ebrake) is not bored out to the full diameter, preventing the use of the 1.96 gears in this case, unless you machine it out a bit. The only problem is with stud buttresses. Rob
This board is powered by the Mr. Fong Device from Cyberarmy.com |