|
|
Posted by Michael Verst [216.196.172.190] on Saturday, March 17, 2012 at 19:18:39 :
In Reply to: Spring pin destructive removal posted by Desoto61 [98.166.17.169] on Saturday, March 17, 2012 at 17:31:12 :
Slide Hammer, I threaded an 3/8 course bolt in the zert hole then carefully welded around the bolt being sure not to weld the hanger,only the pin, made a special end for the slide hammer and had at it. After the shock from the slide hammer the pin broke loose and came right out.
Follow Ups: