|
|
Posted by clueless [201.197.162.212] on Tuesday, March 13, 2012 at 17:13:17 :
In Reply to: Re: if push came to shove--ot---on topic posted by Jerry in Idaho [69.59.83.175] on Tuesday, March 13, 2012 at 16:43:21 :
yes i realize that the bolts are integrated with steel in the rubber when it is vulcanized and as mike says so much for isolation but they do seem to work well, rubber must be pretty tuff stuff
there is a place here that will make anything you want just bring them the sample and they all ready have a bunch made up for various applications
the mack mounts were about 3 in. in dia about the same in height and had a large threaded stud sticking out top and bottom
I think you could set the transfer case on these or similar motor mount on a crossmember rather than hang it, seems i recall the m37 being like this
Follow Ups: