|
|
Posted by Keith in Washington [131.107.0.94] on Monday, January 16, 2012 at 18:59:12 :
In Reply to: Power Wagon-Alaska Tough! posted by KenaiGary [65.74.48.28] on Sunday, January 15, 2012 at 22:25:01 :
If it is not the correct one. Take the original into a NAPA store. Tell them to measure the motor length, diameter and shaft diameter and length. They have a book from which they can get most motor sizes. I did it for my 42 WC53. Not much has changed. Simplyget a 12 volt and do not worry about the resistor. It was a 1 day turnaround for me and a lot cheaper than VPW