|
|
Posted by Todd Somers [67.213.39.234] on Monday, August 29, 2011 at 21:07:21 :
In Reply to: Gas Tank Sending Unit Questions posted by dave horvath [24.131.120.209] on Monday, August 29, 2011 at 20:41:45 :
Asuming that the gauge and sender are both in operating condition, you will need a 12 to 6 volt converter unit. (You might want to test the gauge and sender with 6 volts before going any further.) The converter units are available from auto restoration speciality companies and maybe even NAPA or other part suppliers. Maybe someone on the forum has a a favorite supplier. A converter unit is better than a resistor which must be carefully sized to operate properly and not damage the circuit.