Posted by Daryl in Oz [210.50.228.4] on Sunday, June 12, 2011 at 20:19:40 :
In Reply to: motor swap and now won't start posted by Mike Mann [64.149.47.141] on Sunday, June 12, 2011 at 19:45:34 :
1 & 3. Low vacuum will cause gas as you describe. Try giving it a good shot of straight gas down the carb to get gas to the cylinders, once it fires it may settle down and improve. Low vacuum is always a concern though.
2. A condenser can go bad quickly, but you need to check wiring again. Also check no crud between the points. Check point gap again. Have you got the ignition timing right?
Follow Ups: