|
|
Posted by Doug in N.Y. [76.77.159.34] on Wednesday, June 08, 2011 at 10:27:54 :
In Reply to: Safe Way to Fill Split Rims posted by JohnD [71.246.82.206] on Tuesday, June 07, 2011 at 21:02:12 :
I always use a clip on air chuck with enough lead that I can stay very remote (usually outside of the garage). On my end, the hose is hooked up to a Milton pressure gauge so I can monitor the amount of pressure just by releasing the handle. Like other posters suggest, i place the split 180 degrees opposite the valve stem, make sure everything is straight and positioned correctly. Lastly, I was fortunate enough to buy a surplus inflation cage super cheap, so no need to chain the rim. I have never has a problem with these type of rims. Safety First!