|
|
Posted by David Sherman [72.47.9.228] on Monday, March 07, 2011 at 00:10:54 :
In Reply to: F-350 Diesel Cranking problem posted by Mark in NJ [75.198.200.176] on Sunday, March 06, 2011 at 04:15:53 :
Check voltage at bat posts and at starter post while cranking. Should not be more than a volt or so drop between the two locations. If more, check voltage across each connection, or just crank a while and feel if any is hot. Easiest thing first is to rule out bad connections, which are pretty easy to find if you measure across each one while cranking.