|
|
Posted by chriscase [63.199.243.35] on Wednesday, January 26, 2011 at 20:07:54 :
In Reply to: Clutch rubbing just a little... posted by Matthew F [76.31.136.35] on Wednesday, January 26, 2011 at 19:36:13 :
You usually have an inch or so of play before the pedal gets hard.
Sounds like you may need to tighten it up, then it will release more fully.
Though you may have bent the disc when installing the tranny. The weight of any tranny is enough to bend the disc, those 200 pounders make it even more critical to get them in without letting it hang by the input shaft for even a second- that is when things get bent.
New discs on freshly ground surfaces will make a swooshing noise. But can you get into gear without grinding, if you wait long enough?
Follow Ups: