|
|
Posted by Tom Petroff (IL) [66.167.182.79] on Sunday, December 05, 2010 at 08:19:39 :
In Reply to: Vapor Lock posted by Bruce in Pa [74.5.1.29] on Sunday, December 05, 2010 at 08:08:27 :
The orginal way was up from the pump to the carb. right along side the manifold.
I have made a new line routing it over as close to the inner fender,then up and back to the carb.
This cured mine.
But make sure the fuel pump heat sheild is in place and the manifold carb heat butterfly is in summer.
Sometimes thess are frozen up so check it and see.
TGP
Follow Ups: