Re: Ron - it is the Static Loaded Radius not the height

Posted by mike Stone Idaho, USA [71.39.211.42] on Wednesday, September 22, 2010 at 15:25:57 :

In Reply to: Tire recommendation posted by Ron in San Mateo [75.18.206.6] on Wednesday, September 22, 2010 at 12:24:57 :

measure from the center of the axle to the ground/floor with the tires you have on the
rig at the present time
a 9.00r16 michelin has a SLR of about 16in
(15.95) and an 11.00r16 has a SLR of 17.05
now how much garage clearance do you have?
not a very big deal to change a garage door
(unless you have a stucco house)
you might have a problem in finding fresh 9.00r16 michelins not so with 11.00r16s
you might contact universal or lucas tire to
get the data on 9.00x16 NDTs or perhaps VPW
has the specs

Follow Ups:

• mike, as the slr increases doesnt the diameter increase also? - dan m 18:47:10 09/22/2010
  • Re: mike, as the slr increases doesnt the diameter increase also - mike Stone Idaho, USA 20:15:58 09/22/2010
  • Re: mike, He's just allowing for the soft spot on the bottom. - Chriscase 19:30:32 09/22/2010
• Mike - Current radius - Ron in San Mateo 17:50:42 09/22/2010
  • Re: Mike - Current radius - mike Stone Idaho, USA 18:16:27 09/22/2010
    • Can you tell my wife... - Ron in San Mateo 19:25:07 09/22/2010
      • Re: Can you tell my wife... - Jerry in Idaho 19:44:55 09/22/2010

Post a Followup