|
|
Posted by Keith in Washington [24.41.41.111] on Tuesday, March 23, 2010 at 14:35:33 :
In Reply to: I think it is a case of terminology posted by Clint Dixon [65.125.107.152] on Tuesday, March 23, 2010 at 12:52:42 :
.JPG)
Jonas I looks like they did the right thing. They chuck their lathe on the bearing races not the spindle. The races are what everything is centered to which is correct. That makes sure that the hub and drum are spinning on the same surfaces that they trued the drums to. It is also very nice that they marked the spindles and drums so that you can put each assembly together as they originally were. No you know that you will have the same bearings and races back together which is important.