|
|
Posted by Kevin in Ohio [67.150.80.106] on Friday, February 12, 2010 at 14:55:37 :
In Reply to: Layout question posted by David Sherman [24.32.202.83] on Friday, February 12, 2010 at 14:39:48 :
You didn't mention what diameter pipe were talking about but if fairly small you can do it this way. Get a hole saw the same diameter of the pipe and drill a piece of oak in a drill press . Turn on it's side and drill either the hole size or a bushings OD if your going to do alot of them. Then drill 2 holes on the end. You can either bolt or lag bolt it togethe. Involved but it has to be there it will work. kevin
Follow Ups: