|
|
Posted by mannyc [173.77.206.217] on Friday, February 05, 2010 at 20:07:30 :
chris - here is a picture of the bracket assembly that you want. it is from a late ffpw. to install you unbolt the stock brake pedal assembly and bolt this entire unit in. the way it is set up, the pushrod rides within the dimensions of the bracket. the master is bolted directly to the back of the unit. the bolt pattern for the master accepts the chevy master everyone on here uses. its the right way to go if you can find one or good start if you are going to build one. fwiw, the stock pw bushings and shafts can be used dimensionally, but they need to be cut for size. the bracket aligns the pedal in the stock pedal travel path so there is no interference. you may decide to cut the orig three hole cast boss to allow return spring hookup. i left mine in place.
picture from tood somers & t137.com
Follow Ups: