|
|
Posted by George (AB) on Wednesday, July 22, 2009 at 21:32:34 :
In Reply to: Re: Replacing the head gasket. posted by MIKE STONE COTM JEROME,IDAHO on Wednesday, July 22, 2009 at 15:32:03 :
Yes, the same size and a bottoming tap,, I now agree with draining everything if there are bolts that have to be sealed. It is not unusual to see some bubbles but if you see them cold withh the water pump belt off then it is leaking for sure. If you have access to a rad pressure tester it would be advisable to pressure test and try and discover if coolant is getting into the cylinders and which one. Too many times I have seen things torn down without being diagnosed then using a magnifying glass to try and see the problem
Follow Ups: