Trial and error, modifying product.

Posted by Chriscase on Thursday, June 04, 2009 at 15:43:39 :

In Reply to: Re: MIG wire size lesson learned posted by Franz© on Thursday, June 04, 2009 at 13:49:10 :

Grinding welds with a cut off wheel to make changes. Or breaking welds with lever. I guess you could call it a "in house bend test".

And the difference between .o3o and .035 is about 50%. VERY significant in these type low wattage machines. That's the equivalent of a .015 step at .050 range of your 500 amp machine.

Follow Ups:

• math lesson 101 - Smart A 16:25:10 06/04/2009
  • Re: math lesson 101 - M Fanoni 22:50:26 06/04/2009
  • I did say "about 50%. " - Chriscase 22:44:33 06/04/2009
  • Re: math lesson 101 - Franz© 22:34:34 06/04/2009
    • But Franz, not only do I think it helps... - Chriscase 10:13:06 06/05/2009
      • Re: But Franz, not only do I think it helps... - Dana (in Lancaster) 11:12:16 06/05/2009
        • But you've got double the amperage. - Chriscase 12:56:10 06/05/2009
          • Re: But you've got double the amperage. - Franz© 02:59:39 06/06/2009
  • One cannot simultaneously convince.... - J-Gilly 18:34:40 06/04/2009
    • Re: One cannot simultaneously convince.... - Chriscase 22:47:14 06/04/2009

Post a Followup