|
|
Posted by Vaughn on Friday, February 27, 2009 at 10:22:40 :
In Reply to: Engine removal questions posted by Mark Palmer, Utah on Friday, February 27, 2009 at 09:46:19 :
I would remove the radiator front section for no ther reason than to have more room for removal of the engine. Decoupling should occur between bell housing and trans. If you look, the bell housing mounts the engine to the frame and the transmission has no crossmount to hold it, so if you separate between engine and bell housing, well you know the rest of the piece. You also have to take cab floor plates off to separate the trans and set it on the floor, because you have to pull trans back away from bell housing to clear the trans input shaft.
Follow Ups: