|
|
Posted by Drew M. on Monday, November 24, 2008 at 15:32:51 :
In Reply to: Re: Poly 318 engine question posted by Ron in San Mateo on Monday, November 24, 2008 at 15:19:58 :
That is exactly the problem. The spacer idea is doable to get the hose fitting away from the cover to run the small hose to the w/p.
I saved your photopage - they are immensely helpful to me swapping the 230 to a 360/mech bell/NP435. I have a NP435 hydraulic clutch setup with Chelsea PTO - but am going with a mechanical setup to shorten the bellhousing/input shaft 1.5" to run a mechanical fan in a M37. I choose the mech route after watching a fellow M37 owner struggle using the 318 poly bellhousing. The PW seems to have a little more length to work with than the M37.
Follow Ups: